EZ-GLOW 

 EZGLO IS A HIGH GLOSS, NON–YELLOWING ACRYLIC FLOOR POLISHFOR USE ON ALL TYPES OF SEALED FLOORS. IT NOT ONLY DRIES TO AHIGH GLOSS FINISH, IT CAN BE MAINTAINED BY SPRAY BUFFING. 

EZGlo contains no toxic heavy metals or butyl solvents and has very low VOC’s.EZGlo is used to maintain floors in a brilliant polished condition with minimal of labor. All types of sealed concrete floors as well as sealed wood and composition floors will improve their appearance and decrease maintenance costs with the use of EZGlo. EZGlo produces a beautiful high gloss, wet look shine upon drying, without buffing. Buffs up to a super shine using simple Spray Buffing techniques with a mixture of one part of EZGlo and 3 parts water. No special equipment is required and re-coating is reduced to a minimum. Highly detergent resistant. EZGlo is not harmed by repeated scrubbing with a neutral detergent, or damp mopping between buffing. Restore worn areas by re-Coating with EZGlo. Just damp mop, apply and let dry. Spray Buffing will blend in the re-coated area. EZGlo is highly slip resistant and meets the ASTM D–2407 requirement for slip resistance EZGlo is economical. One gallon covers over 1200 sq. ft. per coat, and lasts for months without re-coating. Simple Spray Buffing maintenance keeps the clean, bright polished look for months, and the acrylic polymers do not ever yellow. Remove old polish thoroughly by scrubbing with CitraPro. Rinse floor well and let dry completely. Spread EZGlo in a thin even coat over the floor using a Lambs wool Applicator or a clean yarn mop. Allow to dry completely, about 25 to 30 minutes. Apply a second coat and let dry completely before allowing traffic on the floor. Spray Buffing: Dilute 1 part of EZGlo with 3 parts of water. Using a Trig Mist sprayer, mist lightly over a 1 sq. meter (10 sq. ft.) area and buff with a polishing pad until all liquid disappears and a brilliant shine appears. Repeat this until the entire floor is renovated and polished Maintenance: Occasional damp mopping with a neutral detergent will maintain the smooth glossy surface. In Heavy Traffic areas, after mopping and rinsing, let dry and apply a thin coat of EZGlo. 

• Type: Super acrylic floor polish
• Color: Colorless, non yellowing
• Odor: Very mild
• Toxicity: Non–toxic
• Flammability: Non–Flammable
• pH: 8.5–8.9
• Composition: Acrylic polymer emulsion, ethylene copolymers, proprietary additives and quality control agents.