|
Klear Koat™ is a solvent based pure acrylic coating that forms a tough crystal clear coating that seal, beautifies and protects all concrete surfaces. It is odorless and never yellows. Klear Koat 25 contains 25% Solids. KlearKoat™ contains no chlorinated solvents or other ozone depleting solvents.KlearKoat™ is available in various concentrations, and is applied by brush, roller or spray overcured dry concrete. Applied over concrete stains, KlearKoat™ seals, enhances the color, andlocks in the color to produce a permanent and beautiful stained floor. Once dry, a second coat may be applied to enhance the floor. Clear and Colorless: KlearKoat™ goes on water white and never yellows. Seals and Beautifies: KlearKoat™ penetrates into the pours of the concrete and seals out dirt and stains as it seals in the beauty. Dries to a smooth, tough, glossy finish: KlearKoat™ flows and levels toprevent brush strokes or roller marks, and dries smooth and glossy. Available in various solids levels:KlearKoat™ can be applied at 15% to give deep penetration and sealing. This can be followed by a layer of 22% or 30% which will bond and unify with the sealer coat for a continuous protective coating of pure acrylic polymer. Successive coats always bond together. Dries quickly: The active solvent system in KlearKoat™ evaporates quickly and completely leaving only the acrylic polymer. Once dry, all flammable solvent is gone and the area is safe and ready to use. Accepts water based polish: For useindoors, the finished coating can be over coated with a water based polish to act as a renewable wear surface. Always assure good ventilation when using KlearKoat™. 1. KlearKoat™ may be applied by brush, roller, solvent resistant pump up sprayer, or lambs wool applicator. Apply a thin uniform coat at the rate of one gallon to 400 ft2 (40 m2) 2. Allow coating to dry for 4–6 hours and apply a second coating for maximum durability. 3. Equipment may be cleaned with xylene or lacquer solvent.
Type: Solvent based pure acrylic coating.Color: Colorless and clear.Odor: SolventToxicity: Harmful if swallowed. Avoid breathing vaporsVOC’s: Depends on concentration Flammability: Flammable Composition: Pure high molecular weight acrylic polymers in an aromatic solvent base. This product can not be shipped to the state of California. Due to VOC regulations, this product cannot be shipped to the states in green on this map. http://www.vexcon.com/images/Map-VOC-10-06.gif For more information on this product Call or Email us:  |
