Rescue-Pak contains six of our most effective admixtures proven to solve problems in the field: Supercizer 5, Slick-Pak II, Super Air Plus, Mini Delayed Set, Super Slump Buster, and Standard Delayed Set.

ADVANTAGES

• Rescue-Pak improves your bottom line by saving loads of concrete at the job site which would otherwise be rejected.
• Our admixtures are packaged in patented water-soluble bags for convenient use at the plant, on the road or at the job site.
• Heavy-duty, watertight carrying case.
• Handy waterproof field guide and usage directions.
• Product Bulletins and Material Safety Data Sheets included to comply with jobsite safety regulations.
• All our products meet or exceed applicable ASTM standards.

PRODUCT DESCRIPTIONS

Supercizer 5
Use Supercizer 5 to increase slump of concrete by 6" or for a 25% water reduction. Supercizer 5 is formulated to produce stronger, more durable concrete. Supercizer 5 meets ASTM C-494 Type F, AASHTO M-194 and CRD C-97. Refer to the Supercizer 5 Product Bulletin for more information.

Slick-Pak II
Slick-Pak II increases the ease and range of pumpability, while decreasing wear on equipment, horsepower required for pumping, and friction and line pressure. Slick-Pak II minimizes slump and air loss through pump lines, and does not affect ultimate strengths of concrete. Refer to the Slick-Pak II Product Bulletin for more information.

Super Air Plus
Use Super Air Plus when the level of entrained air is below job requirements. Super Air Plus will increase the content of entrained air in concrete by 0.75 to 2%. Super Air Plus meets ASTM C-260, AASHTO M-154 and CRD C-13. Refer to the Super Air Plus Product Bulletin for more information.

Super Slump Buster
Use Super Slump Buster when low slump is required for proper placing. Super Slump Buster permits controlled slump reduction, allowing placements on inclines or curbs, while minimizing segregation. Super Slump Buster improves finishing characteristics without changing the water-cement ratio. Refer to the Super Slump Buster Product Bulletin for more information.

Standard Delayed Set
Use Standard Delayed Set to retard the set of fresh concrete, in cases when the ready-mix truck has a long distance haul, the truck or other equipment breaks down, or when the temperature at the job site is too high. Standard Delayed Set meets ASTM C-494 Type D, AASHTO M-194 and CRD C-87. Refer to the Standard Delayed Set Product Bulletin for more information.

Mini Delayed Set
Use Mini Delayed Set for wash water stabilization, when no washout is allowed at the job site. Use it to retard the set of concrete whenever an unexpected delay occurs. One bag of Mini Delayed Set retards one yard of concrete for one hour. Mini Delayed Set meets ASTM C-494 Type D, AASHTO M-194 and CRD C-87. Refer to the Mini Delayed Set Product Bulletin for more information.